Failure configuring updates, reverting changes

Re: Failure configuring updates, reverting changes

Postby aker » 08.08.2018, 19:57

Then you can use software such as BOOTICE to write an Windows NT 6.x MBR without needing a Windows DVD.
Wer Rechtschreibfehler findet, darf sie behalten oder an den Meistbietenden versteigern. / Everybody finding a misspelling is allowed to keep or sell it.
aker

WSUS Offline Update „Community Edition“
https://gitlab.com/wsusoffline/wsusoffline/-/releases
aker
 
Posts: 3999
Joined: 02.03.2011, 15:32

Re: Failure configuring updates, reverting changes

Postby daz » 10.08.2018, 18:42

Ok I will try BOOTLICE.

I tried startup repair a few times and it didn't do anything. Then I tried Easy BCD and I couldn't boot anything.
daz
 
Posts: 24
Joined: 22.07.2018, 15:54

Re: Failure configuring updates, reverting changes

Postby Dalai » 10.08.2018, 19:53

EasyBCD (and bcdedit) can't help here. Although both are closely connected, it's not about the boot manager but the boot sector, either MBR or partition boot sector. That's why I wrote about bootsect.exe and bootrec.exe in one of my previous posts.

Regards
Dalai
Dalai
 
Posts: 1041
Joined: 12.07.2016, 21:00

Re: Failure configuring updates, reverting changes

Postby aker » 11.08.2018, 00:36

BOOTICE is able to edit the MBR.
Wer Rechtschreibfehler findet, darf sie behalten oder an den Meistbietenden versteigern. / Everybody finding a misspelling is allowed to keep or sell it.
aker

WSUS Offline Update „Community Edition“
https://gitlab.com/wsusoffline/wsusoffline/-/releases
aker
 
Posts: 3999
Joined: 02.03.2011, 15:32

Re: Failure configuring updates, reverting changes

Postby daz » 18.08.2018, 17:29

Ok this is strange, my current MBR appears to Windows NT 5.x, even though I'm on Win 7.

Should I proceed and write a Windows NT 6.x MBR?

Image
daz
 
Posts: 24
Joined: 22.07.2018, 15:54

Re: Failure configuring updates, reverting changes

Postby aker » 18.08.2018, 21:37

But you're currently using GRUB to boot your computer?
Wer Rechtschreibfehler findet, darf sie behalten oder an den Meistbietenden versteigern. / Everybody finding a misspelling is allowed to keep or sell it.
aker

WSUS Offline Update „Community Edition“
https://gitlab.com/wsusoffline/wsusoffline/-/releases
aker
 
Posts: 3999
Joined: 02.03.2011, 15:32

Re: Failure configuring updates, reverting changes

Postby Dalai » 18.08.2018, 23:04

Are you looking at the correct disk in BOOTICE?

Regards
Dalai
Dalai
 
Posts: 1041
Joined: 12.07.2016, 21:00

Re: Failure configuring updates, reverting changes

Postby daz » 21.08.2018, 18:13

Sorry Dalai I was not looking at the correct disk.

I have installed the Windows NT 6.x MBR successfully and it seems to have fixed the missing symbol table error I was getting on boot.

Currently after BIOS says "verifying DMI pool data", GRUB loads, then I can select windows partition, then BCD loads. Does this mean I need to change BCD as default loader instead of GRUB?

Partitions: https://snag.gy/CNWLKs.jpg
daz
 
Posts: 24
Joined: 22.07.2018, 15:54

Re: Failure configuring updates, reverting changes

Postby Dalai » 21.08.2018, 19:32

daz wrote:I have installed the Windows NT 6.x MBR successfully and it seems to have fixed the missing symbol table error I was getting on boot.

Currently after BIOS says "verifying DMI pool data", GRUB loads, then I can select windows partition, then BCD loads. Does this mean I need to change BCD as default loader instead of GRUB?

Mmh, that is strange. Rewriting the MBR should have killed GRUB completely, making BCD come first. However, I see in your screenshot that your Linux partition is the active one which means that the MBR boots that partition, not the Windows one. The fact that your Windows partition is not the active one may even explain why the (automatic) startup repair didn't fix anything previously.

There are probably multiple steps necessary to be able to get BCD to boot first, and there are many things that could go wrong. I haven't dealt with such a partition table before (I always create only one small active primary boot partition, the rest are logical partitions, including all OS partitions). It wouldn't hurt to try the startup repair again. Maybe someone has a better idea how to solve this in an easy way.

Regards
Dalai
Dalai
 
Posts: 1041
Joined: 12.07.2016, 21:00

Re: Failure configuring updates, reverting changes

Postby daz » 21.08.2018, 19:55

Ok, I could try it again.

I did find this too:

https://pw999.wordpress.com/2013/12/21/ ... d-of-grub/

Could give this a try? Would it help my situation?

EDIT:Also what if I use BOOTICE to change the active partition to the windows partition? That way MBR may load BCD first?
daz
 
Posts: 24
Joined: 22.07.2018, 15:54

PreviousNext

Return to Installation / Updating

Who is online

Users browsing this forum: No registered users and 16 guests

cron